Fabric Shrinking Machine Model: YL-4800

Yili has 20 years of experience in manufacturing fabric steam shrinking machines, continually enhancing performance through patented fully sealed steam chambers with optimized exhaust. This design ensures 40% energy savings and preventing water drips that cause fabric yellowing.

Our fabric steam shrinking machine stabilizes fabric shrinkage rates, improving dimensional stability and fabric quality. Post-shrinking fabric can be directly cut, boosting production efficiency and brand value. An ideal choice for modern garment manufacturers aiming for cost-effective, high-quality fabric preparation.

Model: YL-4800
Voltage: AC 3PH 380V 50HZ
Steam consumption: 100kg/h
Steam pressure: 0.4-0.7Mpa
Max. Roll fabric diameter: 40cm

Inquiry

Write a Review

Product feature

The machine is equipped with one set of steam humidification pre-shrinking area, two sets of drying area and one set of cooling area, and each area is connected by conveyor belt.

Fabric Shrinking Machine Model: YL-4800 2

● Steam humidification for fabric pre-shrinking & soften.

The fully sealed steam chamber structure is used to ensure the steam temperature, humidity and pressure, so that the fabric can be pre-shrinking more fully.

Fabric Shrinking Machine Model: YL-4800 3

● Heating for fixing fabric

The drying area adopts the upper and lower drying chamber. Lower drying chamber is use steam heating,upper drying chamber is use electric heating. Not only for save energy but also meet the temperature require of different fabric.

● Cooling for relaxing fabric

Adopt strong vacuum cooling device, quickly cooling fabric, stabilize fabric size.

● Vibration function

The entire conveyor belt is equipped with vibration function, let the fiber to be fluffy naturally and relaxation.

Fabric Shrinking Machine Model: YL-4800 7

● Dust remove device

The drying area is equipped with a dust removal device, which is more convenient to operate and reduces the potential safety hazards caused by untimely dust removal and high accumulated temperature for a long time.

● Shutdown delay device

After the shutdown, the conveyor belt will continue to run for 20 minutes, so that the belt is completely stopped in the cooling state, avoid the belt being burned out due to the sudden shutdown of high temperature.

● Auto tension-less release fabric

With electric eye and unique mechanical and electrical device combination (fabric release roller and conveyor belt both controlled by motor), to let fabric shrinking under tension-less condition.

● Spreading fabric

With fabric spreading roller system, to let fabric smoothing and remove fabric wrinkle so that the whole fabric shrinking effect is even.

Drying temperature adjustable & Speed adjustable

Special conveyor belt structure, no need to worry about conveyor belt deviation

Measurement, fabric length counting

Available for Input Roll fabric and Output Relaxing fabric.

Applicable fabric types: Knit and woven, a variety of general fabric.

Product advantages

Fabric Shrinking Machine Model: YL-4800 17

Adopt unique exhaust design

The ironing environment is relatively sealed, achieving heat preservation effect and reducing steam loss.

Fabric Shrinking Machine Model: YL-4800 18

Use imported brand control appliances

The machine is durable and can be used normally for over ten years.

Fabric Shrinking Machine Model: YL-4800 19

The steam chamber is made of multi-layer stainless steel material

Ensure that there is no dripping water, avoid dripping water that may cause the fabric to turn yellow and become unusable.

Fabric Shrinking Machine Model: YL-4800 20

The steam chamber adopts a fully sealed design without extraction steam

● The steam chamber is fully sealed to minimize the amount of steam used, and to ensure the recycling of steam in the steam chamber and save energy.
● Ensure the steam temperature and humidity to achieve the best pre-shrinking effect.

Specification

Model	YL-4800
Voltage	AC 3PH 380V 50HZ
Steam consumption	100kg/h
Steam pressure	0.4-0.7Mpa
Max. Roll fabric diameter	40cm
Max. Fabric working width	2100mm
Working speed	1-20m/min
Drying temperature	Max.200
Total power	15Kw
Dimension	531026101650mm

We' d Like to Hear from You !

Do you have any questions? Welcome to leave us a message

If you have any questions about our products or services, feel free to reach out to customer service team.

YILI, Your Reliable Partner

Let's Build The Future Together.

We have over 30 years of rich production experience in the manufacturing process of pre-sewing and post-sewing equipment.

Obtained over 50 patents, possesses a comprehensive reserve of automation technology, and continues to invest in research.

We have established customer project cooperation in more than 80 countries around the world.

Global Cooperation with Quality & Innovation. Pre-and Post-Sewing Equipment Solutions Provider.