Cloth Rolling Machine Fabric Inspection | Fabric Rolling Measuring Machine

In order to prevent unnecessary risks, when operating the cloth winding machine, you must operate in accordance with the safety operating procedures, that is, you must pay attention to the following processes. First of all, before starting the machine, you must first carefully check to see if there is There are sundries, and whether the card slot of the cloth winding machine is fastened. If it meets the operating standards, it can be turned on for work. When performing the operation, the operator, regardless of gender, must tighten the collar, cuffs and trousers. This is to prevent the exposed straps and hair from being caught in the machine and causing accidents. Of course, if two people are operating on the cloth winding machine, they must cooperate with each other. They should all focus on their work and get mutual cooperation and coordination. And after turning on the machine, let the machine idle for a few weeks, so as to check whether there is any abnormal sound of the machine, and start it officially if no jamming phenomenon is found.

In the textile industry, the use of cloth rolling machine can be said to be widely used. It is used in various materials such as non-woven fabrics, foam, leather, paper, reflective materials, acetate cloth, reinforcing tape, conductive cloth and other materials. And the repeated rolling of various fabrics before cutting and bundling. The cloth rolling machine can roll the cloth into straight or 45-degree twill fabrics. At the same time, the photoelectric edge alignment can be effectively aligned regardless of the thickness of the required materials. A machine that automatically controls the code and can set the length of the roll. Their double frequency conversion stepless speed regulation can also control the rolling speed. It is also equipped with advanced anti-wrinkle rollers and seamless stainless steel cloth rolls, which can effectively deal with dead and live wrinkles on the cloth surface, so it can be applied to the inspection and winding of fabrics such as memory cloth and nylon cotton.

During the rolling process, if the rolled cloth is found to be discounted or deviated, it is strictly forbidden to pick up the rolled cloth directly by hand. What to do at this time is to press the rotary switch, wait until the cloth roll is placed, and then start the machine from slow to fast. Moreover, in daily use, daily maintenance work should be done frequently, and the bearing should be refueled once a week. During the operation of the rolling cloth, if there is an emergency such as a personal or property safety crisis, it is necessary to immediately press the emergency stop switch. After the operation is completed, when removing the cloth roll, make the notch face up, open the card slot, and two people cooperate to remove the cloth roll. After the cloth is rolled, turn off the power supply of the cloth rolling machine, and clean up the site in time to ensure that the site is clean and the passage is unblocked.